[Fot] source for TR4 rear axle U bolts?

[Greg & Alison Blake]

Jim,

I'll be have some made at spring shop for my TR in the next couple of
days.  It takes about ten minutes to make them.  I'm making mine 2"
longer than stock so I can fine tune ride height with blocks.  You want
me to have them make you a set?  What length?
I am using the stock diameter of 3/8".

Anyone else need some?  Different diameter?

Greg  

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of J.C. Hassall
Sent: Wednesday, January 20, 2010 11:39 AM
To: fot
Subject: [Fot] source for TR4 rear axle U bolts?

I'm looking for a source for 3/8" grade 8 U bolts (or bolt stock) for 
the TR4 solid axle.  I've checked the usual suspects locally but no one 
carries bolt stock that small.  Even utility trailer shops don't carry 
stock smaller than 1/2".  Sheesh!

tia

jim

-- 
Jim Hassall
Blacksburg VA
'63 TR4 in autox preparation
99% finished, 90% to go
Suggested annual donation $12.96

You are subscribed as ablake2 at austin.rr.com

http://www.fot-racing.com


Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought to you by Team.Net consulting - Unix software specialist.