[Fot] TR4 accusump plumbing

[Barr, Scott]

Or an NPT fitting and use an adaptor to AN.  It's easier to find a tap,
that way.

Scott

-----Original Message-----
From: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] On
Behalf Of Jim Gray
Sent: Thursday, January 14, 2010 12:14 AM
To: Mike Mehl
Cc: Triumph Friends of
Subject: Re: [Fot] TR4 accusump plumbing

Yes but you have to drill and tap for a -8 or -10 fitting
Jim g

Sent from my iPhone

On Jan 13, 2010, at 10:08 PM, Mike Mehl <mike.mehl at yahoo.com> wrote:

> Can the accusump be plumbed into one of the oil galley ports on the
> side of
> the engine?
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation $12.96
>
> You are subscribed as toodamnfunky at comcast.net
>
> http://www.fot-racing.com
>
>
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.
Suggested annual donation $12.96

You are subscribed as scott.barr at mccarty-law.com

http://www.fot-racing.com


Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought to you by Team.Net consulting - Unix software specialist.