[Fot] TR-3/4 main cap bolts / ARP

[Mark Pendergrass]

Tony, All bolts measure 3.425 w/o washer, washer measures .150. This set i 
have appear to be stock. Mark
----- Original Message ----- 
From: "Tony Drews" <tony at tonydrews.com>
To: <fot at autox.team.net>
Sent: Tuesday, January 12, 2010 7:49 PM
Subject: [Fot] TR-3/4 main cap bolts / ARP


> Anyone have info on dimensions for TR-4 main cap bolts?  The manual shows 
> 1/2" UNC but not the length.  I'm trying to figure out what ARP bolts you 
> would buy to replace the stock bolts, and also one that's 1/2" longer to 
> allow for "strapping" the center main.  If I had the dimensions (length) I 
> could try to cross reference the engines that ARP lists main cap bolts 
> for.
>
> Thanks in advance,
> Tony Drews
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation $12.96
>
> You are subscribed as mpendy at dishmail.net
>
> http://www.fot-racing.com
>
>
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.