[Fot] Caliper Bolt Torque

[MadMarx]

>From Buckeyes Triumph:
Girling "split" calipers should not be separated for any reason.  They were
not designed for separation and reassembly and proper torque specifications
are not known, other than the inner and out bolts are torqued differently.
The inside bolts are 7/16" diameter and the outside bolts are 3/8" diameter.

I torqued the outside 3/8" bolts to 40 ft-lbs and the inside 7/16" bolts to
70 ft-lbs.


-----Urspr|ngliche Nachricht-----
Von: fot-bounces at autox.team.net [mailto:fot-bounces at autox.team.net] Im
Auftrag von Geoff Byrne
Gesendet: Montag, 4. Januar 2010 11:16
An: FOT
Betreff: [Fot] Caliper Bolt Torque

Amici
Does any know the correct torque for the bolts holding the 2 halves of a TR6
brake caliper
Geoff Byrne
TR6 racer down under
You are subscribed as tr4racing at googlemail.com

http://www.fot-racing.com


Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

Brought to you by Team.Net consulting - Unix software specialist.