[Fot] IRS TR rear hubs & axles

[Sam Halkias]

Two words.

Richard Good

http://www.goodparts.com/shop/index.php?categoryID=20


Call Richard at Good parts and his axle/CV joint unit will be the end to your
problems. High quality, great performance. I used them for the last two years
on all of my TR6 race cars.

Sam Halkias

> From: enquiries at roadandtrack.net.au
> Date: Tue, 10 Aug 2010 08:08:03 +1000
> To: fot at autox.team.net
> Subject: [Fot] IRS TR rear hubs & axles
>
> i have finally broken the last of my factory rear hubs at a race meeting,
so
> now is time for change.I got almost 7 years of racing on the last of the
> ones I built with brand new parts, so I'm not complaining
>
> I have looked at some Nissan S13 Sylvia ones and these appeal as they have
a
> CV jointed axle (which I would have to shorten) and appear relatively easy
> to adapt into the IRS trailing arm. Big bonus is the identical stud
> pattern. I have seen the older Nissan 260Z and 510 sedan ones fitted, but
> they use the very heavy rolling ball axle, which is now technically
> out-dated.
>
> what are other racers in the USA currently using??
>
> thanks
>
> Terry O'Beirne
> Australia
> _______________________________________________
> fot at autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/fot/atr6racer@hotmail.com