[Fot] TR4 distributor question - advice needed

[riverside]

Anybody ever try is "Smokey's way"/
For serious race engines, Yunick said to ditch
the advance mechanism all together and
lock the thing down.  to start, start to spin engine
over w/ ign off , then turn on ign.
an MG twin cam point plate can be useful if
you can find one.


  art de armond


----- Original Message ----- 
From: "Chuck Arnold" <triosan at gmail.com>
To: "Mark J Bradakis" <mark at bradakis.com>
Cc: "Triumph Friends of" <fot at autox.team.net>
Sent: Saturday, October 24, 2009 10:33 AM
Subject: Re: [Fot] TR4 distributor question - advice needed


> Pertronix also makes the entire distibutor for the 4 and 6.  Works great.
>
> On Fri, Oct 23, 2009 at 8:50 PM, Mark J Bradakis <mark at bradakis.com> 
> wrote:
>> A pertronix unit replaces the points, it does nothing for the advance.
>> Get those weights and springs under the plate in working order.
>>
>> mjb.
>> _______________________________________________
>>
>> Support Team.Net http://www.team.net/donate.html
>>
>> http://www.fot-racing.com
>>
>>
>> Fot at autox.team.net
>> http://autox.team.net/mailman/listinfo/fot
>>
>> Brought to you by Team.Net consulting - Unix software specialist.
>>
>
>
>
> -- 
> Chuck Arnold
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
>
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.