[Fot] KVS-175 VELOCITY STACKS & FINE WIRE MESH FILTERS

[robert bownes]

On that note, if anyone has a set of stacks that will fit the TR6 SU's let
me know offline.

Thanks to a mouse that packed some bedding into the airbox, I set my air
filter on fire the other day when moving the TR6 out of the garage after a
long rest and have decided it's time for an update.

On Wed, Oct 14, 2009 at 10:26 AM, <N197TR4 at cs.com> wrote:

> FOT:
>
> Disregard if you do not have these velocity stacks.
>
> I just received a new production run of custom filters for the Kastner
> designed velocity stacks. I have six pair.
>
> I have had inquiries but no product, until yesterday. Bill Hirsch has
> experienced extraordinary success and acceptance with these filters in all
> applications. I feel fortunate that he took on this low volume for the
> KVS-175.
>
> Additionally, I asked Bill Hirsch to revise the molds for a more secure
> fit.  I am satisfied that he did this after some trial fitting. You may
> need a
> small amount of 'personal' lubricant to install and this is included.
>
> NOTE: If you had any issues with the first production run filters popping
> off, send back to me and you will receive another pair.  and some personal
> lubricant.
>
> Thanks.........Joe Alexander
>
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> You are subscribed as bownes at web9.com
>
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot