[Fot] TR3/4 Performance Camshafts - commercial message

[Larry Young]

I am getting together an order of camshafts for the TR3/4.  I now have 4 
different grinds, including a high performance street cam and three 
different racing cams.  Complete specs along with those of other TR3/4 
cams are listed at my website (link below). If you think you might need 
one of these within the next few months, you should get in on this group 
order.  I have purchased a small batch of new chilled cast iron blanks, 
so I can grind the cam on a new blank or regrind a stock cam.  The 
advantage of using a new blank is that the diameter of front half will 
be about 1/8 inch larger, i.e. stiffer and stronger.

I believe I have finally found a grinder that does a good job at a 
reasonable price.  He has some of the best CNC equipment available.  CNC 
is nice because I can do a new grind without the up front cost to make a 
master.

I've also got my Cam Doctor up and running and have now profiled a 
number of TR3/4 racing cams.  I would like to profile some of the 
Kastner cams, because 0.050 numbers are not available for them.  I also 
plan to start profiling cams for the 6 cylinder motors, e.g. TR5 cam.  
If you would like to loan me some interesting cams for profiling, please 
let me know.  I will gladly share any information I get.

Larry Young
www.TildenTechnologies.com