[Fot] tr4 front end

[n197tr4 at cs.com]

Mark,

One of our FOT has come up with a design &? the tooling to produce? fully adjustable upper A-arms. A major feature is that it can be adjusted ON the car without disassembly. Two sets have been installed and I received a set a short time ago.


For further information contact??? vintage.racer at comcast.net??? or??? n197tr4 at cs.com


Joe A





-----Original Message-----
From: Mark Pendergrass <mpendy at dishmail.net>
To: fot at autox.team.net
Sent: Tue, 24 Mar 2009 12:04 am
Subject: [Fot] Fw: tr4 front end



FOT members, new to the group of TR enthusiast. [ yes i did peek in websters
for spelling] .I have a 62-63 tr4 vintage racer which after rebuilding the
entire front-end i am trying to set the proper alignment specs. I realize
there is not alot to do as far as camber angle, but previous parties have gone
to great lengths to adjust camber ie; slightly bent vertical links, front
lower wishbones etc; I thought about changeing to a later year for ease of
adjusting , maybe later. What are you racers out there setting your
caster,camber,toe ? The car is shod with 23-9.5-15 slicks. Yeh, i know, it's
nothing that Sovern cares to see!!!  Any input would be greatly appreciated. [
I peeked there to]  Mark Pendergrass (Pendy) #65
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot


________________________________________________________________________
Email message sent from CompuServe - visit us today at http://www.cs.com