[Fot] brake bias

[rob]

On Randalls sujestion i did a quick check on the disc thickness on  about 10
locations   Many are the same and the most variation is .006 I did not spend
much time on this and will do it more carefully as time allows  It will take
more time to  do the run out check as well. Is .006 enough to cause sittuation
rob
  ----- Original Message -----
  From: Bill Babcock
  To: rob
  Cc: fot at autox.team.net
  Sent: Tuesday, March 17, 2009 4:09 PM
  Subject: Re: [Fot] brake bias


  I'd see how true your rear disks are, a little wobble causes a lot of
pressure variation. Rear wheels are also prone to a lot more hop as the weight
shifts forward. Hard to see how that would make the pressure flutter, but it
might.


  On Mar 17, 2009, at 8:56 AM, rob wrote:


    I have Mike Munson's rear disc brake convertion on my tr-6. I recently
added
    bias gauges. The rear gauge flutters rapaidly under breaking.I have not
lost
    performance and i  am pretty certain there is no air in the system The
gauge
    for the front remains steady under breaking thanks for the help    rob
    _______________________________________________
    Support Team.Net http://www.team.net/donate.html

    http://www.fot-racing.com

    Fot mailing list
    Fot at autox.team.net
    http://autox.team.net/mailman/listinfo/fot




  Bill Babcock
  Babcock & Jenkins
  Billb at bnj.com
  503.936.7660
  www.bnj.com


  Editor
  Ke Nalu e-Magazine
  Paddlesurfing's Web Journal


  Bill at kenalu.com
  www.kenalu.com
  blog: www.ponohouse.com/ponoblog