[Fot] Metal Question

[Bill Babcock]

It will anneal them, which is not exactly the reknitting process you  
hope for, but it might relieve enough of the work hardening to keep  
them from breaking right away. You need to make sure to let the metal  
cool very slowly.
On Jan 4, 2009, at 1:48 PM, Mark Eginton wrote:

> As one of those classic projects that just keeps getting deeper, I  
> stripped
> the engine compartment of my TR 3. Picture the tabs used to bend  
> around the
> wiring harnesses that have been bent back and forth for 50 years. If  
> I heat
> them till red and let them cool slowly, will the atoms reknit  
> eliminating
> stresses from all the bending or will I end up with burnt toast?
>
> Happy New Years - got pistons etc for Christmas - Santa been berry  
> good to
> me...
>
> Mark
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>

Bill Babcock
Babcock & Jenkins
Billb at bnj.com
503.936.7660
www.bnj.com

Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal

Bill at kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog