[Fot] 2 questions

[Joe Boruch]

Teriann, weld the axle tubes to the diff housing.  The pins work themselves
loose, so also weld the pins in.  The housing is basically cast steel and will
weld fine with a mig welder.  Joe(B)

---------- Original Message ----------
From: "TeriAnn J. Wakeman" tjwakeman at gmail.com

#1 I have gear lube weeping between the diff housing and the axle tube.
Assuming that doesn't mean an axle tube is about to fall off (I hope
not) what is the best way to seal this weep?  Braze the junction all the
way around?  or ??

Teriann
____________________________________________________________
Compete with the big boys.  Click here to find products to benefit your
business.
http://thirdpartyoffers.netzero.net/TGL2231/fc/BLSrjnxUki9SBXpRqqlFzfWFNMXgT2
x4zMgHdxHwGKuBC4h19L9lNFAfx2A/