[Fot] Supplimental oil feed to head

[fpspitfire at comcast.net]

While I have never fitted one of these to any of my engines as I've never found the need they are simple enough to make and you can do a far nicer looking job that the one from Moss of VB that uses the oil sender location for the off take.  I have one of these somewhere if someone wants it.

You can get two AN-3 fittings, and make a nice proper length AN-3 oil hose to go between the rear most oil passage and the bolt fixing on the top.  Probably for a 1/3 the price the Moss kit is.

I believe the standard practise if you fit one of these is to block off the oil passage that goes through the head by drilling and tapping a plug at the block.

aaron

-------------- Original message -------------- 
From: REK46 at aol.com 
Didn't VicBrit sell these also?....comes out of oil pres. gauge hole-up to the rear head  passage bolt....ready to bolt on, -3 aroquip.


**************
Psssst...Have you heard the news? There's a new fashion blog, plus the latest fall trends and hair styles at StyleList.com.
(http://www.stylelist.com/trends?ncid=aolsty00050000000014) 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20080918/e095b554/attachment-0003.htm>
-------------- next part --------------
An embedded message was scrubbed...
From: REK46 at aol.com
Subject: Re: [Fot] Supplimental oil feed to head
Date: Thu, 18 Sep 2008 13:28:22 +0000
Size: 659
URL: <http://autox.team.net/pipermail/fot/attachments/20080918/e095b554/attachment-0003.eml>