[Fot] Steel Flywheels by A.R.E. for FOT Some choices in production.

[N197TR4 at cs.com]

If not interested in Flywheels, please delete.

If I do another production run of TR3/TR4 Flywheels, I may be able to combine 
with a first production run of TR6 (later crank).

There are some common manufacturing operations that may allow some cost 
benefits of combining these production runs.

Furthermore, I get requests for the drilled and tapped holes associated with 
aftermarket clutches.

Chuck Arnold asks if flywheels can be manufactured without the drilled and 
tapped holes. This could be a brilliant idea if folks have the capabilities of 
doing their own mounting holes. (Proof of concept needs to be checked)

This would eliminate the transport of the Flywheels to a different Machine 
Center and reduce the cost of production. My experience with deducts is that it 
would not be generous.

This project may proceed, but likely very slowly. It wont be a high priority, 
unless the numbers start to look very good.

Excel Spread Sheet Time...who is interested if we can do 'blanks' for 
mounting aftermarket clutches.

Joe A

   </HTML>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20080929/a5efced4/attachment-0002.htm>