[Fot] Soft mounts for H6 SU's

[Tim Murphy]

We had a problem with the front H6 SU going rich at the end of the front straight and in the carousel at Elkhart Lake last weekend so I want to make some soft mounts for the carbs.  I'll get the material and O-rings from McMaster-Carr so I have a lot of choices.  I was thinking of using a phenolic called Garolite or an acetal.  The O-ring material I was thinking of was Viton.  Any suggestions?  And does the hardness of the O-rings make much diference?  There were some threads on this back about 7 and 8 years ago that I looked up in the archives but no specifics on materials.

Tim
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/fot/attachments/20080923/5fa8ab27/attachment-0002.htm>