<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2900.3354" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>We had a problem with the front H6 SU going rich at
the end of the front straight and in the carousel at Elkhart Lake last weekend
so I want to make some soft mounts for the carbs. I'll get the material
and O-rings from McMaster-Carr so I have a lot of choices. I was thinking
of using a phenolic called Garolite or an acetal. The O-ring material I
was thinking of was Viton. Any suggestions? And does the hardness of
the O-rings make much diference? There were some threads on this back
about 7 and 8 years ago that I looked up in the archives but no specifics on
materials.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Tim</FONT></DIV></BODY></HTML>