[Fot] TR6 Crankshaft Configurations - Re: Scrapers

[fasttrs]

I have had to make minor "adjustments" with a file on all three of the
cranks I have used. All three were short tail shaft cranks and used with the
same I-J scraper and oil pan.

Mike
#28 EP TR6

-----Original Message-----


Terry O from Australia indicates that there are three possible
configurations 
of TR6 Crank Shafts that may affect the application of the I - J Scraper.  

I suspect the variations are very minor and less of an issue with Teflon.
But 
it is somethat that I - J will want to be aware of.

(Note: all but two orders for TR6 Scrapers include the Teflon Option.)

Any insight that TR folks have on these configurations would be appreciated 
and DOCUMENTED.

Thanks!

Joe Alexander