[Fot] TR6 Crankshaft Configurations - Re: Scrapers

[N197TR4 at cs.com]

Terry O from Australia indicates that there are three possible configurations 
of TR6 Crank Shafts that may affect the application of the I - J Scraper.  

I suspect the variations are very minor and less of an issue with Teflon. But 
it is somethat that I - J will want to be aware of.

(Note: all but two orders for TR6 Scrapers include the Teflon Option.)

Any insight that TR folks have on these configurations would be appreciated 
and DOCUMENTED.

Thanks!

Joe Alexander

   </HTML>