[Fot] TR3 piston rookie question

[Joe Boruch]

2" compression height is correct.  Joe(B)

-- Larry Young <cartravel at pobox.com> wrote:
I believe your asking for the compression height, i.e. the distance from
the wrist pin center to the top of the piston.  Someone please correct
me if I'm wrong, but I believe you need a 2.000 in compression height to
put the top of the piston level with the deck.

Greg & Alison Blake wrote:
> Can anyone tell me the crown height for a stock TR3 piston?  If I order
> the stock height + .005, will I have enough extra to mill off to get a
> zero deck height?  As far as I know the block has not been decked in the
> past.
>
> Thanks,
>
> Greg
> _______________________________________________
> http://www.team.net/donate.html
>
> cartravel at pobox.com
> Fot mailing list
> Fot at autox.team.net
> http://autox.team.net/mailman/listinfo/fot
jaboruch at netzero.net
Fot mailing list
Fot at autox.team.net
http://autox.team.net/mailman/listinfo/fot

_____________________________________________________________
Click for free info on business schools, $150K/ year potential.
http://thirdpartyoffers.netzero.net/TGL2211/fc/Ioyw6ijlScb83RqBPXVW9HCpYwvtuT
xWJKIeWscRXockyHSyaJI9Ux/