[Fot] dual circuit brakes on a tr4

[Fubog1 at aol.com]

In a message dated 11/1/2007 4:37:13 PM Eastern Daylight Time,  
markvaden at gmail.com writes:

Do I use  the same bore cylinders? Meaning to I just use two stock tr4
brake master  cylinders?



Depending on what brakes you have, friction material, driver preference,  etc 
you can play around with cylinder sizes .625, .70, .750 etc, & pedal  ratio, 
to get the best setup.
There's a good chance that you will wind up with the same diameter  cylinders 
without extreme bias adjustment.
Glen



************************************** See what's new at http://www.aol.com