[Fot] Those bare metal Triumph accelerators

[Marx Christian tr4-racing]

hmmmm thought about that too but dropped that idea speedly after a short
test.
The troublesome thing is "going on throttle". With much grip on the pedal
surface the pedal don't slip smoothly along the shoe anymore which makes the
ride very rough and dangerous when accelerating out of a corner.

Cheers
Chris


At 12:01 PM 8/11/2007, jim hearn wrote:
    >Has anybody successfully addressed those bare metal Triumph accelerators?
I
    >was thinking of gluing on to the face of the accelerator some rubber or
    >maybe some abrasive cloth.  I thought I would see if anyone had come up
with
    >a good match here.  Jim in Sacramento


    Not a Triumph accelerator, but my Formula Ford has a small piece
    of the stuff they put on skateboard decks.  Works well to give you
    some grip.  One piece costs about $25, as I recall, but will last you
    a lifetime.



    R. John Lye


    rjl6n at cstone.net
    _______________________________________________
    http://www.team.net/donate.html


    tony at tonydrews.com
    Fot mailing list
    Fot at autox.team.net
    http://autox.team.net/mailman/listinfo/fot