[Roadsters] brake hoses

[Pat Horne]

If the bracket is twisting, you are probably trying to use one wrench. Hold the hose end with vice grips & use a flare wrench on the hard line. 

Once you get the connection apart, there is a clip that slips in on top of the bracket that will slide out releasing the hose. 

Peace,
Pat

Pat Horne 
We support Habitat for Humanity


On Jul 12, 2021, at 5:55 PM, dave via Datsun-roadsters <datsun-roadsters at autox.team.net> wrote:


I am trying to replace the front brake hoses on an early 67 roadster.
 
The upper part, next to the frame, is attached to a bracket welded to the frame.
 
Trying to undo that but the bracket is twisting.  Any thoughts on how to get that undone?
________________________________________

datsun-roadsters at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/pipermail/datsun-roadsters http://autox.team.net/archive

Unsubscribe: http://autox.team.net/mailman/options/datsun-roadsters/patintexas@icloud.com


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/datsun-roadsters/attachments/20210712/02e2dd37/attachment.htm>