[Roadsters] frustrated question.....:)

[Rick Stayner]

I put a stop on my window regulator so that the window hits it before the
squeegee bends downward. The window sits about 3/16 above the inner felt, and
I have Dean's improved weather strip installed. Dean's are way better than
OEM.
 
Rick Stayner
69 2000
Harrisburg, Pa
 

________________________________
From: Mark Hatch <mhatch at ics.com>
To: datsun-roadsters at autox.team.net 
Sent:
Friday, May 31, 2013 2:13 PM
Subject: [Roadsters]  frustrated question.....:)
Me toob&



Dead @ Fairlady sells an improved strip that seems better than the
NOS. But
it also has the problem.



After staring at the window and door a
lot, I came to the conclusion that
it had to deal with the window channel
making one edge closer to the
sweeper and so create too much friction. I got
some relief by adjusting the
window channel (read enlarge the bolt hole for
the channel and move it out.
But that didnbt seem to really work much.
Anybody else have  solution?



Mark





Message: 4

Date: Fri, 31 May 2013
08:16:31 -0700

From: "Ed and Sandie" <edsandie at telus.net>

To:
<datsun-roadsters at autox.team.net>

Subject: [Roadsters] frustrated
question.....:)

Message-ID: <9305EB79702A464A83FD46BE147B9DC1 at sandiePC>
Content-Type: text/plain; charset="us-ascii"



We have a 1969 2000 roadster
SRL 311 we are restoring, we installed the

sweeper weatherstrip on the door
window but it wont stay straight, inside

piece always rolling up and outside
rubber squeegie rolls in when we roll it

down, is there a something we are
doing wrong?  OR is this the way it will
be,

or should we glue the inside
track? OR is it fitting too tight?



Thanks Sandie
________________________________________

datsun-roadsters at autox.team.net
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/ricksrl@yahoo.com