[Roadsters] screw thread size for hitachi carbs

[ppeters914 at comcast.net]

Good luck, but.....

The headlight retaining screws on the 411 are 4mm with that odd .75 pitch. I checked with Tacoma Screw, Maryland Metric, and several others. They don't exist.

Googling found one reference to an old (WWII?) French rifle part.

Maybe Ztherapy?

Pete   
Sent via BlackBerry by AT&T

-----Original Message-----
From: "Gordon Glasgow" <gsglasgow at comcast.net>
Sender: datsun-roadsters-bounces at autox.team.netDate: Fri, 5 Jul 2013 22:02:08 
To: 'robert williams'<wilrobasy at hotmail.com>; <datsun-roadsters at autox.team.net>
Subject: Re: [Roadsters] screw thread size for hitachi carbs

Disclaimer: These are the sizes I measured on my 2000 SU's, but I don't
think the 1600 ones are necessarily different. Oddly, my parts manual lists
the same part number for both the piston pot screws and the float bowl cover
screws on the 2000 SU's (contradicting what I just measured), but different
numbers for those two screws on the 1600.

The screws for the piston pots are 5mm x 0.8 pitch. That's pretty standard.

The screws for the float bowl covers are 5mm x 0.75 pitch, which is
definitely not standard. I believe it's called a French Metric. You might be
able to special-order them through a place like Tacoma Screw Products if the
vendors don't have them.

Gordon Glasgow

-----Original Message-----
From: datsun-roadsters-bounces at autox.team.net
[mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of robert
williams
Sent: Friday, July 05, 2013 7:37 AM
To: datsun-roadsters at autox.team.net
Subject: [Roadsters] screw thread size for hitachi carbs

Hello List,

The ground up resto is in the home straight so looking to finish up a few
smaller items.
Does anyone know the thread size of the following screws:
4 x phillips head screws that fasten the top of the float bowls on the
hitachi carbs 4x screws for the piston pots on the carbs for an early (1966)
1600 low screen.

I thought they may be 11/32 unf but alas they seem to be a smaller.
The tops of my screws are burred and battered from years of abuse so thought
I would replace them.

regards,

Rob
________________________________________

datsun-roadsters at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/gsglasgow@comcast.net
________________________________________

datsun-roadsters at autox.team.net

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/datsun-roadsters/ppeters914@comcast.net