[Roadsters] Volvo brake system problem

[Mark Dent]

Usually that is a sign of the brake pedal rod being too long. It does not let
the mc release. Next time it happens pull the brake pedal towards the rear of
the car and see if it pops back

This happened to someone else a few years ago and his rear brakes were too
tight and when they got hot it put pressure on the system.

Sent from my iPhone

On May 22, 2011, at 12:37 PM, Paul Souza <pauljsouza at yahoo.com> wrote:

> Hi Everyone,
> My brakes stay engaged after 5-10 minutes of driving.  For some reason the
> brakes stay enaged enough to slow the car down some.
> This problem has been occuring for the past few years now.
>
> I welcome ANY ideas on how to resolve this problem.  I have a 280z brake
> master cylinder with volvo brake calipers in the front with standard brake
> wheel cylinders in the rear.
>
> Thanks,
> Paul
> 69 2000
> Vacaville, CA
> ________________________________________
>
> datsun-roadsters at autox.team.net
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe:
http://autox.team.net/mailman/options/datsun-roadsters/mark@dealermats.com