[Roadsters] oil pressure guage woes
MH
twobeaners at earthlink.net
Sun Feb 21 13:44:28 MST 2010
Might this be what you need?
http://www.mcmaster.com/#4860k141/=5x1y9k
Mike Hudson '67 - Stroker / 5-Speed
----- Original Message -----
From: "Ronnie Day" <ronnie.day at gmail.com>
To: "steven boortz" <vociferouschicanery at yahoo.com>
Cc: "roadsters" <datsun-roadsters at autox.team.net>
Sent: Sunday, February 21, 2010 2:09 PM
Subject: Re: [Roadsters] oil pressure guage woes
> Steve,
>
> The hole is BPST, I think, and while you can tap it, it's tight
> getting the tap handle in there. Easiest deal is to go to a local auto
> parts place and get the bag of adapters from Equus. I couldn't find it
> on the Equus site, but I got mine at the local O'Reilly's for under
> $10. One of them screws right in.
>
> Ron
>
>> hi everyone
>> thanks in advance for any help you might offer.
>> i bought a new mechanical oil pressure guage (AutoMeter) because my
>> original
> guage was giving some funny readings. B i removed the original sender from
> the
> block, and attempted to insert the adapter (1/8 NPT female to 1/8 BPST
> male).
> B i cannot thread the adapter into the block. B at all. B it won't even
> start.
> B the 1/8 NPT compression fitting that would go into the adapter won't go
> into
> the B block either. B the original sender unit screws in by finger
> strength,
> no problem. B i cannot tell by holding them together, whether the threads
> on
> the original sender are closer to the 1/8 NPT or 1/8 BPST, they are that
> close.
>> any ideas?
More information about the Datsun-roadsters
mailing list