[Roadsters] help wanted volvo brake conversion

[garytew at cox.net]

I had the same problem with my swap.  It wound up being a bad master cylinder.  I swapped it out and had no further problems.  Also make sure your rotors aren't rubbing on the caliper.  I had my rotors diameter trimmed down but stil had some rubbing on the caliper.  Took a die grinder to the caliper and smoothed the rubbing area a bit to free it up.  Hope this helps.

Gary Tew
Phoenix, AZ
67 1600 w/VG30 swap
www.members.cox.net/garytew


---- Francis Anand <francis67datsun at yahoo.com> wrote: 
> Hey guys i need help . I did a volvo brake conversion on 70 roadster.I used
> 311 site for info. Used original new brake master cylinder .Now the problem is
> the brake is hanging on me.
> Both the front wheels gets hot and locks doesnt turn. We took all air
> bubble out  .  I bled rear  rt first    rear left   front rt    front lt.. The
>  front caliper i did top  inside , bottom inside  ,and then outside.    Also
> tried doing reverse method  left front    right front    left rear   right
> rear   . Is there something that i am doing wrong?          
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as garytew at cox.net
> 
> Datsun-roadsters mailing list
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/datsun-roadsters