[Roadsters] Sun-visor/rear-view mirror screws

[Pete Peters]

Oh....goodie.....can't wait......

 -------------- Original message ----------------------
From: "Paul" <9laser3 at bright.net>
>   Sun visors are easy.  Wait until you try the upper a-arm spindle bushings!
> I soaked them for almost two weeks and still bent the breaker bar!
> 
> Paul
> JB BLASTER user
> Ohio
> 
> -----Original Message-----
> 
> I believe Liquid Wrench works best, but it does take days, and it is best to
> wire brush any dirt/rust off the surface first. I have also been known to
> tap the metal parts with a hammer to help. 
> 
> JimG
> 
> --- On Tue, 7/29/08, Tim <tputland at charter.net> wrote:
> 
> > I have let bolts soak for several days as well. With some of
> > the fender bolts you most likley would not be able to get
> > them out even after a week of soaking but the visor mounts
> > should loosen up with some patient soaking.
> > 
> > Tim
> > =============
> > Dave,
> > I have an original 64 with every screw and bolt on the car
> > rusted in. Before I
> > attempt any removal, I soak the screw/bolt with Marvel
> > Mystery oil and let it
> > set for 2-3 days....yeah, 2-3 DAYS!  It takes a lot of
> > planning and patience,
> > but I've stopped busting bolt heads off or stripping
> > screws.  A persuasive tap
> > with a hammer after soaking helps free them up.
> > Good luck!
> > Patti
> > --- 
> > 
> > On a similar topic to the bolt heads... any hope of getting
> > my
> > sun-visor and rear-view assembly off?  I've tried WD-40
> > so far without
> > any success, but I'm reluctant to really twist hard in
> > fear of
> > deforming the phillips head and then never getting it off.
> > Suggestions?
> > 
> > Dave Riedel
> ________________________________________
> Support Team.Net  http://www.team.net/donate.html
> 
> You are subscribed as ppeters914 at comcast.net
> 
> Datsun-roadsters mailing list
> 
> http://www.team.net/archive
> 
> http://autox.team.net/mailman/listinfo/datsun-roadsters