[Roadsters] Pull motor and trans?

[Andrew Murphy]

I'm in agreement with everyone- have at it.

I was lucky in the sense that I live in SoCal and there is a great community
of roadster people that were more than happy to help me when I pulled my
motor/trans. I also go along with everyone in get as many buds to help as you
can, take all precautions, take your time and have fun.

Everything of value I have ever learned I learned because the first time I
tried it I failed.

Have fun,

Andrew Murphy
1966 1600> Date: Tue, 23 Dec 2008 09:34:01 -0600> From:
Phillip.B.Hall at nasa.gov> To: spl310 at hotmail.com;
datsun-roadsters at autox.team.net> Subject: Re: [Roadsters] Pull motor and
trans?> > Yes - Go for it.> > Take precautions like Sid and others have said,
then get dirty. I> pulled my first Roadster motor 30 years ago when I was 16
and it took me> two weeks with the temperature between 0 and -10. That was
pre-net days> and the manual said to pull the entire exhaust. I started to
take it> out and thought - why?? The 311 site is a wonderful resource that
will> not get you down the wrong road. There are some short cuts but the>
basics are there. Spend a day and take your time. Remember to make all> those
bolts/parts right when the motor is out so the second time you> pull the motor
it should only take an hour or two.> > Now days, I find it easier/faster to
pull the motor/trans then to pull> the head with the motor in the car.> >
Phil> SEROC> > -----Original Message-----> From:
datsun-roadsters-bounces at autox.team.net>
[mailto:datsun-roadsters-bounces at autox.team.net] On Behalf Of sidney> raper>
Sent: Tuesday, December 23, 2008 8:07 AM> To: Regular Roadster List> Subject:
Re: [Roadsters] Pull motor and trans?> > Rich,> > Jump in and get dirty! Just
think things through and take your time.> Remember that hoists and jacks can
be dangerous if not respected, and> you should be fine. Pulling an engine can
be done fairly quickly if you> are not overly concerned about scratches in the
engine bay. If you are> concerned about those, it takes a bit more time. If
you have any> questions about pulling the engine, drop me a line and I will be
happy> to help. I am on digest and get this info a couple of days late, but>
direct mail I get daily.> There is a checklist on 311s.org that helps with a
lot of it.> > Sidney Raper> 1964 1500 (still a project.... sigh....)> 1967
SRL311 00076 (alive again!)> Jacksonville Florida>
http://www.geocities.com/roadsternut/index.html> > > >
_________________________________________________________________
Send e-mail faster without improving your typing skills.
http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_hotmail_acq_speed_122
008