[Roadsters] Rotisserie progress.

[Daniel Solomon]

very nice.  I'd say "cleaner" than my approach. 
I think I'll be finished with mine this weekend, and I'll try to post 
pics as well. 

Graeme wrote:
> Hi folks,
> for those who expressed an interest in building a Roadster Roisserie, I have
> finally got it happening.
> Centre of Gravity worked out very well, it doesn't seem to have any balances
> issue at all!
> Many thanks to those who gave me enough info. to guesstimate the pivot
> locations.
> Front pivot is 190mm from the bottom of the front apron, rear pivot is 100mm
> from the bottom of the rear apron.
> This is for a totally bare shell, no chassis, no rollbar, but with door
> opening braces.
> Anyhoo, I have posted some more pics. with captions at the site below, for
> those who wish to know.
> HYPERLINK
> "http://nissanman.shutterfly.com/action/pictures?ap=1&a=67b0de21b35562a6052c
> &pg=0"http://nissanman.shutterfly.com/action/pictures?ap=1&a=67b0de21b35562a
> 6052c&pg=0
>  
> If anyone needs detailed measurements etc. let me know and I'll knock up
> some CAD drawings for it.
> I usually build something first then draw the plans afterwards ;)
> One stabilising leg was shorter than the other so I'll swap them over and
> that should give me 360deg rotation.
> If it doesn't then I can still raise the vertical posts to achieve it.
> 50/50 chance and I chose wrong!
> Regards,
> G.S.
>  
>
> No virus found in this outgoing message.
> Checked by AVG Free Edition. 
> Version: 7.5.503 / Virus Database: 269.15.12/1098 - Release Date: 29/10/2007
> 9:28 AM
> ________________________________________
>
> d-solomon at comcast.net
>
> Datsun-roadsters mailing list
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/datsun-roadsters