[Bricklin] 1974 Idler Pulley (for Belt Tensioner)

[Scott Isensee]

Rockauto.com has a great selection of parts and usually has pictures. You
could look it up for something like a Javelin and see if the picture matches
your part.

Scott

Sent from my iPad

> On May 16, 2018, at 6:47 AM, Greg Schroeder <gschroeder at comcast.net> wrote:
>
> Alan,
>
> I had replaced mine, but I do not have any info.  Looks like I replaced it
in 2006 based on one email I found, but I did not find the part number.  I
normally use AMC Hornet or Javelin for my cross references.
>
> Greg
>
> -----Original Message----- From: Alan Coleman
> Sent: Tuesday, May 15, 2018 5:20 PM
> To: bricklin at autox.team.net
> Subject: [Bricklin] 1974 Idler Pulley (for Belt Tensioner)
>
> Looking to hear from someone who has had to replace the Idler Pulley on
their
> 1974 (nineteen seventy four) Bricklin.  The bearings in mine are shot. I am
> hoping to find a direct replacement that does not drilling out the mounting
> hole on the bracket so that it is round.  Does anyone have the information?
> Can't find it on any of the cross reference lists. Can the bolt with the
flat
> side somehow be removed from the old one and be reused? Just looking to
hear
> from someone with a 74 who has had to replace theirs, no guesses please.
>
>
> Thanks a lot!
>
>
> AlanC
>
> #246 Original Owner
> _______________________________________________
> Bricklin at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/gschroeder@comcast.net
_______________________________________________
> Bricklin at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/isensee@aol.com