[Bricklin] 1974 Idler Pulley (for Belt Tensioner)

[Greg Schroeder]

Alan,

I had replaced mine, but I do not have any info.  Looks like I replaced it 
in 2006 based on one email I found, but I did not find the part number.  I 
normally use AMC Hornet or Javelin for my cross references.

Greg

-----Original Message----- 
From: Alan Coleman
Sent: Tuesday, May 15, 2018 5:20 PM
To: bricklin at autox.team.net
Subject: [Bricklin] 1974 Idler Pulley (for Belt Tensioner)

Looking to hear from someone who has had to replace the Idler Pulley on 
their
1974 (nineteen seventy four) Bricklin.  The bearings in mine are shot. I am
hoping to find a direct replacement that does not drilling out the mounting
hole on the bracket so that it is round.  Does anyone have the information?
Can't find it on any of the cross reference lists. Can the bolt with the 
flat
side somehow be removed from the old one and be reused? Just looking to hear
from someone with a 74 who has had to replace theirs, no guesses please.


Thanks a lot!


AlanC

#246 Original Owner
_______________________________________________
Bricklin at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $11.47
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage: 
http://autox.team.net/mailman/options/bricklin/gschroeder@comcast.net