[Bricklin] HVAC blower mismatch

[Doug]

The vintage air system works great and cleans up so much under the dash.

Sent from my iPhone

> On Apr 11, 2014, at 4:06 AM, "Rick at High Tech Coatings"
<rick at hightechcoatings.com> wrote:
>
> don't over think the issue, there is no need to move anything, just clan up
> both ends of the gap real well and bridge the gap with dynamat or similar.
It
> is the easiest solution, it will work better  than before but still not
> perfect. If you want perfect remove all the original stuff and install a
> vintage air gen4 magnum system.
>
>> On 4/10/2014 8:23:15 PM, Brett Kelsey (brett.kelsey at comcast.net) wrote:
>> I have the Dash off in order to replace the heater core and would like to
>> do
>> something with the misaligned blower. I thought Terry had a kit or
>> something
>> to patch it but when I spoke with his shop in Virginia I was told they
>> were
>> working on a new design that
>> wasn't ready to sell yet. Has anyone come up
>> with a good fix? I'm
>> thinking of making something  using  2 or 3mm thick
>> plastic pieces.
>> _______________________________________________
>> Bricklin at autox.team.net
>> Donate: http://www.team.net/donate.html
>> Suggested annual donation  $11.47
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage: http://autox.team.
>> net/mailman/options/bricklin/rick at hightechcoatings.com
>
>
> ---
> This email is free from viruses and malware because avast! Antivirus
> protection is active.
> http://www.avast.com
> _______________________________________________
> Bricklin at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $11.47
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/bricklin/dgrdigdoug@aol.com