[Bricklin] 360 carb

[Kevin D. Hand]

Edelbrock 1806, I think with thunder series electric choke   and idle  
stop solenoid.

Kevin Hand
#462
Sent from my iPhone

On Sep 27, 2009, at 3:10 PM, Bricklin0095 at aol.com wrote:

> I also use the Edelbrock  1406 carb.  I use the edlebrock  performer  
> intake
> also.. The original intake on the 360 is a spreadbore style.  The rear
> holes are larger than the front. The 1406 carb is a square bore.  
> The  holes are
> the same size.. You need an adapter plate to mix them.Also need the
> Chrysler kick down adapter to use on an automatic.
>
>
> -----Original  Message-----
> From: serge.ber at sympatico.ca
> To:  bricklin at autox.team.net
> Sent: 9/27/2009 9:01:05 A.M. Eastern Daylight  Time
> Subj: [Bricklin] 360 carb
>
>
> who replaced there carb on 360 what did you used ..what  brand did  
> you used
> and
> part number if you can please ...was it perfect fit  ...tks for  
> info  serge
> Bricklin at autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You  are subscribed as  bricklin0095 at aol.com
>
> http://www.team.net/archive
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> Bricklin at autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as khand1486 at earthlink.net
>
> http://www.team.net/archive