[Bricklin] 360 carb

[Bricklin0095 at aol.com]

I also use the Edelbrock  1406 carb.  I use the edlebrock  performer intake 
also.. The original intake on the 360 is a spreadbore style.  The rear 
holes are larger than the front. The 1406 carb is a square bore. The  holes are 
the same size.. You need an adapter plate to mix them.Also need the  
Chrysler kick down adapter to use on an automatic.
 
 
-----Original  Message-----
From: serge.ber at sympatico.ca
To:  bricklin at autox.team.net
Sent: 9/27/2009 9:01:05 A.M. Eastern Daylight  Time
Subj: [Bricklin] 360 carb


who replaced there carb on 360 what did you used ..what  brand did you used 
and
part number if you can please ...was it perfect fit  ...tks for info  serge
Bricklin at autox.team.net
http://autox.team.net/mailman/listinfo/bricklin

You  are subscribed as  bricklin0095 at aol.com

http://www.team.net/archive