[Bricklin] Doors & center caps

[serge berube]

i was thinking of that this summer ..the only thing was wondering if it would
worp door shell guess spot weld and tig weld it ..but still worried about that
lol

> From: treefrogno9 at webtv.net
> To: jblair1948 at cox.net; bricklin at autox.team.net
> Date: Sat, 7 Nov 2009 23:27:49 +0000
> Subject: Re: [Bricklin] Doors & center caps
>
> Didn't someone at one time weld a extension strip around the inside edge of
the door frame to double the width of the glue seam area? It seems like that
would give a much better bond to the door skin. It would add a little weight
to the door. But a wider metal contact area (Even if only done to the roof
area.) would have to be stronger if it was double the width, perpaired right
and modern glues were used. For E-T center caps you can try Whiteys Wheels
www.whiteyswheels.com in Hughesville Pa. Thanks
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> Bricklin at autox.team.net
> http://autox.team.net/mailman/listinfo/bricklin
>
> You are subscribed as serge.ber at sympatico.ca
>
> http://www.team.net/archive