[Bricklin] Door Not Opening

[Seth]

If I had to guess, it sounds like your up solenoid has gotten plugged. 
Your air control panel is located
in the compartment behind the driver. It's always easier to work on it 
when it's out of the compartment
so I'd suggest removing the control panel. Then it's just a matter of 
opening the solenoids and cleaning
any debris out. Take the nut off will allow you to get the coil off the 
valve. Then a flathead screwdriver
will allow you to unscrew the valve. Clean out the seat and reassemble.

Seth
#1544

David Dal Bianco wrote:
> Hi Guys,
> My driver door will not open when the door button is pressed.  It has been
> acting sluggish for some time now.  The passenger door opens fine, although
> sometimes it opens too fast.
> Any ideas where I should start to troubleshoot this?  I'd appreciate your
> help.
> Thanks,
> Dave
> __________________________________________________________________