[Bmcu] Searching for a TR-4 Tool

[Gary Lindstrom]

Rich,

The Moss listing pooh-pooh's using a screwdriver and hammer but it's 
always worked for me.

BTW don't just tighten it - remove it, replace the fiber washer, and 
clean the oil filter it contains - esp. if your O/D isn't engaging reliably.

     --Gary
     --born yesterday

On 4/16/2013 9:31 AM, richsanders2020 at comcast.net wrote:
> BCMU gang
>
> Looking for anyone in the club who may have a TR-4 overdrive drain 
> plug tool. I'm not sure if it's common to later or earlier models.
> Moss Motors part number is 386-336. I have a pesky drip that 
> invariably lands on the exhaust. Not a pleasant or reassuring smell on 
> a 90 degree August day. It may simply be that the plug is not tight 
> enough without this specialty tool. Trying to avoid spending the $60 
> at Moss. Willing to trade beer, car-talk or use of my garage lift for 
> a day if you have one I can borrow!
>
> Rich Sanders
> TR4, born on 3/19/1963

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/bmcu/attachments/20130416/000aadc3/attachment.html>