[Alpines] Zenith carb gaskets

[Wiencek, Thomas]

I second this possibility.  I use a pressure regulator in the fuel line (set
at 1 psi) and I put in a different needle valve design (grose jet).  Never had
any oozing.
-----Original Message-----
From: alpines-bounces at autox.team.net [mailto:alpines-bounces at autox.team.net]
On Behalf Of Mary and Ron Tebo
Sent: Sunday, June 06, 2010 10:24 AM
To: William Lewis
Cc: alpines
Subject: Re: [Alpines] Zenith carb gaskets

Bill:

Are you sure your float level is not too high? Also, do you have correct
floats and correct fuel pressure?

William Lewis wrote:
> Phil
>         I have always had trouble with my Zeniths leaking around the top.
> I have used the gaskets from rebuild kits from Sunbeam Specialties, made
> my own gaskets from gasket material, coated them with shellac, etc, etc.
> If anyone knows of a way to stop them from oozing, please let me know.
> Bill Lewis
> FrankenSeries II
> _______________________________________________
> Alpines at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $17.25
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/mrtebo@shaw.ca
_______________________________________________
Alpines at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $17.25
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/wiencek@anl.gov