[Alpines] Zenith carb gaskets

[Tony Somebody]

Ive had the same problems- different carbs BUT fuel pressure to high- very
much worth checking as is float level on level ground or concrete floor etc.
TtT

--- On Sun, 6/6/10, Mary and Ron Tebo <mrtebo at shaw.ca> wrote:


From: Mary and Ron Tebo <mrtebo at shaw.ca>
Subject: Re: [Alpines] Zenith carb gaskets
To: "William Lewis" <william.lewis at ucdmc.ucdavis.edu>
Cc: "alpines" <alpines at autox.team.net>
Date: Sunday, June 6, 2010, 10:24 AM


Bill:

Are you sure your float level is not too high? Also, do you have correct
floats and correct fuel pressure?

William Lewis wrote:
> Phil
>         I have always had trouble with my Zeniths leaking around the top. I
have used the gaskets from rebuild kits from Sunbeam Specialties, made my own
gaskets from gasket material, coated them with shellac, etc, etc. If anyone
knows of a way to stop them from oozing, please let me know.
> Bill Lewis
> FrankenSeries II
> _______________________________________________
> Alpines at autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $17.25
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/mrtebo@shaw.ca
_______________________________________________
Alpines at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $17.25
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/achd73@yahoo.com