[Alpines] window mechanism

[£auri]

Great!

I try that.

Thanks for you all, shared experience really works.



Lauri Lehtinen

journalist, engineer

mobile: +358 (0) 400 851988



-----Alkuperdinen viesti-----
Ldhettdjd: jacranwell at aol.com [mailto:jacranwell at aol.com]
Ldhetetty: 4. kesdkuuta 2010 18:09
Vastaanottaja: lehtinen.lauri at kolumbus.fi; alpines at autox.team.net
Aihe: Re: [Alpines] window mechanism



Lauri,



I had the same problem, when fitting an SV unit to my SIII. I just spread
the window bottom channel to fit the larger rounded sliders in the
mechanism, and it has worked fine for the last 10 years.



Julian.



-----Original Message-----
From: #auri <lehtinen.lauri at kolumbus.fi>
To: 'Alpine List' <alpines at autox.team.net>
Sent: Thu, 3 Jun 2010 21:19
Subject: [Alpines] window mechanism

I bought a window lift mechanism for my s4, but didnt know s5 has a
slightly different system. First, fixing points are different both to the
window rail and to the door. It also is possible that when I changed new
toothed segment to my old one, I have missed one pressed steel plate.



How different those mechanisms are? I can cut out old points which connects
window bottom rail and weld it back again, but are those components
otherwise made in the same way of operation?



Has anyone photos?



Lauri Lehtinen

journalist, engineer

mobile: +358 (0) 400 851988
_______________________________________________
Alpines at autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation  $17.25
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/jacranwell@aol.com