[Alpines] window mechanism

[jacranwell at aol.com]

Lauri,

I had the same problem, when fitting an SV unit to my SIII. I just spread the
window bottom channel to fit the larger rounded sliders in the mechanism, and
it has worked fine for the last 10 years.

Julian.






-----Original Message-----
From: B#auri <lehtinen.lauri at kolumbus.fi>
To: 'Alpine List' <alpines at autox.team.net>
Sent: Thu, 3 Jun 2010 21:19
Subject: [Alpines] window mechanism


I bought a window lift mechanism for my s4, but didnt know s5 has a
lightly different system. First, fixing points are different both to the
indow rail and to the door. It also is possible that when I changed new
oothed segment to my old one, I have missed one pressed steel plate.

How different those mechanisms are? I can cut out old points which connects
indow bottom rail and weld it back again, but are those components
therwise made in the same way of operation?

Has anyone photos?

Lauri Lehtinen
journalist, engineer
mobile: +358 (0) 400 851988
______________________________________________
lpines at autox.team.net
onate: http://www.team.net/donate.html
uggested annual donation  $17.25
rchive: http://www.team.net/archive
orums: http://www.team.net/forums
nsubscribe/Manage:
http://autox.team.net/mailman/options/alpines/jacranwell@aol.com