[6pack] [TR] Re-installing Front Suspension Springs

[DAVID MASSEY]

Sent from AOL on Android
On Tue, Apr 11, 2023 at 9:23, Randy and Valerie DeRuiter<deruiterville at hotmail.com> wrote:Except with the added caution that when hardware threaded rod galls, it can lock the nut and really mess up the whole ability to remove the rod. And don't ask me how I know that..
From: Triumphs <triumphs-bounces at autox.team.net> on behalf of DAVID MASSEY <dave1massey at cs.com>Sent: Tuesday, April 11, 2023 7:08 AMTo: triumphs at autox.team.net <triumphs at autox.team.net>; 6pack at autox.team.net <6pack at autox.team.net>Subject: Re: [TR] Re-installing Front Suspension Springs I've found that conventional hardware store all thread (grade 2) will last long enough to change out one set of springs. Even with lubrication the thread wears and gets galled. I went one better and bought some 1/2 inch ACME thread rod and nuts from McMaster-Carr. Of course, ACME thread nuts won't jam since that effect counts on the angle of the thread and ACME has no angle, the threads are square-cut. So I drilled the nut and rod at one end and I use a locking pin to keep the nut on the bottom in place throughout the operation.
My tool has been used for many removal/installs and is still good as new. 
On the other hand, hardware store threaded rod is available today and will work for one operation and is quick and convenient in acquisition.
Dave
Even with a generous application of grease it will gall.












  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20230411/577e783f/attachment.htm>