[6pack] Clutch Set Recommendations

[Tom Walling]

The Roadster Factory has a complete kit for clutch replacements. It's not cheap, but who wants to keep doing a clutch job every 5,000 miles? It is called the "Magic Clutch Kit: and is part number RFK 1109. This is probably the best solution for clutch replacement on the market. Good luck!

>     On 06/17/2021 5:45 PM rmf3860 rmf3860 <bobfabie at gmail.com> wrote:
>      
>      
>     Fellow Enthusiasts,
>      
>     I know this is an old topic, but products and user experiences change over time, so in the midst of my engine/trans rebuild, I thought it best to get the group’s current collective wisdom. 
>      
>     My current set up (which I intend to replace) is a Luk disc, pressure plate and RHP T/O bearing. The T/O bearing has left an indentation on the pressure plate fingers. There’s no more than 5,000 miles on the clutch system. 
>      
>     While idling with the clutch out, there was always a whine-which I believe was the TO bearing spinning against the pressure plate’s straight fingers. The initial clutch engagement was somewhat sudden, not smooth. 
>      
>     What are your experiences and recommendations?
>      
>     Thanks. 
>     Bob Fabie
>     Fredericksburg, VA
>     _______________________________________________
>     Support Team.Net http://www.team.net/donate.html
>     Suggested annual donation $12.96
>     Archive: http://www.team.net/archive
> 
> 
>     6pack at autox.team.net
>     http://autox.team.net/mailman/listinfo/6pack
> 
>     Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/pdqtr6@comcast.net
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20210617/f0b185f7/attachment.htm>