[6pack] 3-point seat belts (TR4, TR250)

[James_]

Oh a late model TR6 the areas you speak of mount on the wheel well. The recoil mounts on the side just above the rear deck and the shoulder anchor mounts on the top of the wheel well.
Both have ‘nuts’ welded to the wheel well.
I suspect the TR4 just had lap belts as I think so did early TR6’s.
Which is probably why you are wondering. When I get home I could take measurements and/or photos.



—Sent from my Atari 2600—

On Sep 3, 2018, at 5:47 PM, Andrew Uprichard via 6pack <6pack at autox.team.net<mailto:6pack at autox.team.net>> wrote:

Some time ago I bought a 3-point seatbelt kit from TRF (part  TRFSB303/1000).  I was going to use them in a TR250, but in the meantime I have completed the restoration of a TR4 and would like to use them in this car.

The kit has a “stalk” which presumably attaches to the gearbox tunnel.  It also has a floor fitting which I imagine goes somewhere around the bottom of the B-post.  The pieces which I am having difficulty with are the recoil part and the shoulder attachment.

Has anyone on the list fitted such a seat-belt and if so, can you share pics of how and where you attached the various anchors?  Thanks !

Andrew Uprichard
Jackson, Michigan

_______________________________________________
Support Team.Net<http://Team.Net> http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

6pack at autox.team.net<mailto:6pack at autox.team.net>
http://autox.team.net/mailman/listinfo/6pack

Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/jattr6@hotmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20180904/249bbbde/attachment.html>