[6pack] PDW Switch

[James_]

I repaired mine years ago. I have a late model unit but I think the difference is small. Very easy and worked great. I'd say go for the repair!


—Sent from my Atari 2600—

On May 31, 2017, at 5:01 PM, Alex&Janet Thomson via 6pack <6pack at autox.team.net<mailto:6pack at autox.team.net>> wrote:

Lists – I know I saw some discussion several months back about repairing/replacing the brake Pressure Differential Warning switch. Naturally, it was not an issue with me then and I didn’t save the responses. At any rate, there is brake fluid leaking out of the actual switch that screws into the PDW block. I noticed that Moss has new ones (aluminum) for $439 and repair kits for the older brass units (such as ours) for $13. Any thoughts on the best avenue to take? Has anyone simply eliminated the assembly and connected the brake lines with couplings, front-to-front and back-to-back? The subject is a ’73 TR6. Thanks.

Alex Thomson
_______________________________________________
Support Team.Net<http://Team.Net> http://www.team.net/donate.html
Suggested annual donation  $12.96
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

6pack at autox.team.net<mailto:6pack at autox.team.net>
http://autox.team.net/mailman/listinfo/6pack

Unsubscribe/Manage: http://autox.team.net/mailman/options/6pack/jattr6@hotmail.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://autox.team.net/pipermail/6pack/attachments/20170601/9345e450/attachment.html>