[6pack] Carburetor Question

[Bob Rochlin]

	Hi list,	This evening I was playing around with the carburetor linkage to try
to reduce some of the play out of throttle linkage/ throttle linkage bracket.
I came up feeling that the slop was supposed to be there due to the way the
linkage came together.         I also found that the front carburetor piston
was noticeably harder to push up than the rear piston and whereas the rear
piston came down smoothly with a click, the front piston came down slowly with
no click and actually hung up once or twice.  The dashpots had equal amounts
of oil and I really couldn't find reason for the difficulty even after reading
up and looking at the Buckeye Triumphs carb section.  	Can anyone suggest a
cause/cure?  As always your collective help is appreciated.
	            Bob Rochlin                     '72 TR6
_________________________________________________________________
The New Busy is not the too busy. Combine all your e-mail accounts with
Hotmail.
http://www.windowslive.com/campaign/thenewbusy?tile=multiaccount&ocid=PID2832
6::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_4