[6pack] Fw: Re: Tr6 Wrist Pins

[Sally or Dick Taylor]

-----Original Message-----
From: Sally or Dick Taylor
Sent: Monday, November 30, 2009 5:04 PM
To: jhmdds at aol.com
Subject: Re: [6pack] Tr6 Wrist Pins

James---Wrist pins should be fitted to their respective pistons, as their tolerances are so close. If you want to chance that you can get a set that fits, try TRF and their part number 149215, known to them as the "gudgeon pin". Just for the heck of it, I measured a few piston/pins that I had under the bench.  All were very close to  .8115. Emphasis on 'close'!

Dick


-----Original Message-----
From: jhmdds at aol.com
Sent: Monday, November 30, 2009 4:07 PM
To: 6pack at autox.team.net, 6pack-request at autox.team.net
Subject: [6pack] Tr6 Wrist Pins

I sent my pistons to be coated with teflon.  Forgot to take out the wrist
pins.  Now they have been separated from one another and the pins cannot be
located.  Does anyone have a source for wrist pins and circlips for my Tr6
pistons?  Found a website with different wrist pin sizes.  Of course that
doesn't help me since I don't have one to measure.  If someone can measure the
dimensions maybe that would be a good route.  Any help would be appreciated.

Thanks,

James
6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You are subscribed as tr6taylor at webtv.net