[6pack] Removing rear Badge

[Dale]

Ken

The Triumph badge and the overdrive badge have posts that go into plastic
inserts. If you take a small flat blade screwdriver and pry under the badge to
raise enough to get tape under the work area. The going side to side with
increasing size screwdrivers it should come off. Do not try to pry from one
side only or you will break the post off.

Dale
________________________________
From: Ken <Ken at azkiwis.com>
To: 6pack
<6pack at autox.team.net>
Sent: Saturday, January 10, 2009 12:04:24 PM
Subject:
[6pack] Removing rear Badge

Thanks for all the info on removing the body
panels /fenders - the deed is
well underway.

One little thing that I haven't
yet figured out.  On the R/rear is the
"Triumph / Overdrive" badge.  I've been
looking at it, but can't figure out
how it's removed without damage.

How do I
do it safely?



Thanks


Ken Davis
73 TR6
Maricopa, Sonoran Desert, AZ
_______________________________________________

Support Team.Net 
http://www.team.net/donate.html

6pack at autox.team.net
http://autox.team.net/mailman/listinfo/6pack

http://www.team.net/archive

You
are subscribed as tpdwinch at yahoo.com