[6pack] TR6 Dizzy - Part 2

[Jeff Scarbrough]

At 08:43 PM 8/31/2009, Joe Laurito wrote:

>Pulled the points and condenser and installed the Pertronix.

The timing would have changed even if you didn't disturb the 
distributor, as the pickup is in a slightly different place than the 
cam lobe/point block.

Did you have the vacuum advance hose connected?  If I'm thinking of 
the right years and your car, it should be disconnected and plugged 
to set the timing.  You will need to get it at the same place as 
before...you might also re-check the installation of the Pertronix, 
as well as all your wiring connections.  Maybe you pinched a wire somewhere?


Jeff Scarbrough      75 TR6 x 1, 76 1500 x 2, 78 1500 x 1, 80 1500 x 0.5
http://www.fishplate.org/vehicles/
Corrosion Acres, Georgia         #354